Maintaining electric forklifts is key to ensuring their safety, performance, and lifespan.

　　By regular maintenance and upkeep, you can minimize malfunctions and damage, and ensure that the forklift is always in good working condition.

　　Here are some key maintenance precautions and suggestions:

　　1、 Battery maintenance:

　　1) Check the charging status of the battery and ensure that it remains fully charged at all times. Regularly check the battery level and add distilled water as needed.

　　2) Clean the battery terminals and ensure that their surfaces are clean. Use degreaser or fine sandpaper to remove any corrosion or oxides.

　　3) Check the density of the battery electrolyte and charge or replace the battery according to the manufacturer's recommendations.

　　2、 Tire maintenance:

　　1) Regularly check the tire pressure and ensure compliance with the manufacturer's recommendations. High or low air pressure can affect the handling and stability of forklifts.

　　2) Check the wear of the tires and replace them as needed. Uneven wear on tires can affect driving smoothness.

　　3、 Bearings and lubrication:

　　1) Regularly inspect and clean the bearings of the forklift, and lubricate them as needed. Dry or worn bearings can cause noise and damage.

　　2) Use appropriate lubricants to coat bearings and other moving parts, ensuring that they remain smooth and free from resistance during operation.

　　4、 Electrical system:

　　1) Regularly inspect the cables, plugs, and connectors of the electrical system. Ensure that they are not damaged, loose, or corroded.

　　2) Clean and inspect the electrical control panel of the forklift to ensure that the electronic components are working properly without dust accumulation.

　　5、 Lights and Annunciators:

　　Check if the headlights, tail lights, and flashing lights of the forklift are working properly. Damaged lights can affect the visibility and safety of forklifts.

　　6、 Regular inspection and maintenance:

　　According to the manufacturer's recommendations, perform regular maintenance and upkeep, including replacing filters, adjusting brakes, and tightening screws. This helps to ensure that the forklift operates in optimal condition

　　7、 Cleaning and protection:

　　1) Regularly clean the external and internal components of the forklift, including the frame, cab, and control panel. Remove dust, oil, and debris to maintain a good working environment.

　　2) When encountering humid, corrosive, or harmful environments during forklift operation, ensure that important components of the forklift are properly protected and sealed.

　　8、 Driver training:

　　Train forklift drivers to familiarize them with the operating principles, safety regulations, and emergency handling of forklifts. Correct driving skills and awareness can reduce the occurrence of accidents and damage.

　　9、 Fasteners and components:

　　Regularly inspect the fasteners and key components of the forklift, such as screws, nuts, and connectors. Ensure that they are not loose or worn, and tighten or replace them as needed.

Note: The article is excerpted from the internet. If there is any infringement, please contact me to delete it!